Google Translate

Worldwide | United Kingdom

RS3 Cable Management Rack System

RS3 Cable Management Rack System  Enlarge this image

Overview

Siemon's RS3 series cable management rack system provides high capacity cable management for routing of both horizontal/backbone cabling and patch cords. Vertical channels with hinged cable manager covers conceal and route patch cables for a clean, professional installation.

  • Header bars incorporate unique slotted holes for securing cable trays routed perpendicularly or parallel to RS3 racks
  • 76mm x 152mm (3 in. x 6 in.) front vertical managers provide capacity for approximately 190 category 6 patch cords
  • RS3 design allows racks to be side-stacked without interference between adjacent racks
  • 116.8mm x 152.4mm (4.6 in. x 6 in.) vertical side rails provide higher cable capacity over standard rack designs
  • Side rails compatible with Siemon's quarter-turn hook and loop cable managers for proper management of cable bundles
  • Access holes on side rails allow cables to be routed between adjacent racks
  • Mounting holes on rear of RS3 accommodate Siemon's vertical power strip (p/n RS-P04) to provide power to active equipment mounted in rack
  • Mounting holes provided for anchoring racks to floor

Benefits

Enlarge this image
Front covers fully conceal all vertical patch cord routing through an easy to use, modular design. Each section can be individually hinged in either direction to facilitate quick and easy changes. Covers include positive securing snap latches for trouble-free fastening
Enlarge this image
The individual managers on the vertical channels are rounded to allow patch cords to seamlessly enter and exit the managers without risk of cable deformation
Enlarge this image
Siemon's series horizontal cable managers provide a fully integrated appearance and hinging design for comprehensive management of patch cords

Part Numbers

RS3-07 (Picture) 2.1m x 0.48m (7 ft. x 19 in.) aluminum enhanced cable management rack system, 45U. Includes rack assembly hardware, vertical cable management channels with hinged covers, and ground lug. height: 2.1m (7 ft.), width: 685.0mm (27 in.), depth: 457.2mm (18 in.)
Add "-S" for steel.

Note:
Aluminum racks are intended for use with connecting hardware and cable managers only. For mounting of active equipment, steel racks are recommended.

1U = 44.5mm (1.75 in.)
See Cable Management Capacity Table

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice


Need Help?

Ask Siemon

info_uk@siemon.com

+44(0)1932 571 771 (UK)
8am-5:00pm (»Worldwide)


Innovate Magazine
Cisco and Siemon

Cisco Technology Developer Partner


See Siemon in Cisco Marketplace:

Category 7 Cabling?
Cat 7 for the real world Articles and case studies 48 pages
» Learn more

Case Studies - See how Siemon is connecting the world to a higher standard
Find Partners

» Find Siemon Authorized Distributors

» Find Certified Installers & Consultants