Heat Shrink Protection Cover
![[Heat Shrink Sleeve]](images/heat.gif)
The "heat shrink" protection sleeves offer the easiest and most reliable way of protecting spliced single optical fibers. The stainless steel reinforcement rod and the hot melt type adhesive inner tube are enclosed in a highly protective polyolefin heat shrinkable outer tube. The centered heat form assembly ensures inner tube and reinforcment rod remain centered within the outer tube, resulting in constant and reliable protection.
Features & Benefits
- Use for either Single or Multimode fiber
- 40 or 60 millimeter lengths are standard - ribbon version available
- Comparable cost to the no-heat versions
Specifications |
|
Operating Procedure for heat shrink sleeves |
First, the operator must slide the heat shrink tubing on before the fusion process. Once the fibers are fused, and heating oven is warm (on some models), slide the sleeve onto the fused portion that requires protecting, and place in oven. After oven alerts when fnished (3-4 minutes), remove heat shrink sleeve, and LET COOL before placing in tray/holder or the user may cause microbending. |
Weight |
.5 grams |
Color |
Clear |
Size |
40 or 60 millimeter single |
Operating Temperature |
105 Deg. C |
Ordering Information |
|
Product # |
Description |
HT-40 |
40 millimeter heat shrink sleeve |
HT-60 |
60 millimeter heat shrink sleeve |
MHT |
40 millimeter MASS or Ribbon heat shrink sleeve |
- Contact OEM
- Contact the OEM Team
- Request OEM Literature
Ally Support Center