QSFP+ FDR Passive Copper Assemblies
QSFP+ FDR Passive Copper Assemblies
Siemon Interconnect Solutions QSFP+ FDR Copper Cable assemblies provide 56Gb/s of bandwidth (4 X 14Gb/s). These QSFP+ (SFF-8436) cables exceed industry standards to support DDR, QDR, FDR and emerging 4x16Gb/s applications. Siemon's QSFP+ Fourteen Data Rate assemblies are a high-density, cost-effective, low-power option for leading edge 56Gbs high-speed data centers, available in standard lengths up to 3 meters with longer custom lengths available upon request.
- Features
-
- Multiple conductor sizes available to achieve optimized performance
- Positive retention pull-release latch system
- High-Density QSFP+ connector
- Ultra low crosstalk for enhanced performance
- PCB Termination
- Laser stripped conductors
- Overmold provides additional strain relief to minimize pistoning
- Automated welding for unmatched consistency
- Welding results in less dielectric shrink-back than soldering
- Applications
-
- InfiniBand 4X SDR, DDR, QDR, FDR
- Ethernet 10G,40G
- FiberChannel 10G,40G, SAN, 4x16G
- RapidIO
- Myrinet 40G
- Rack-to-Rack, Shelf-to-Shelf Interconnect
- Networking
- Storage
- Hubs, switches, routers, servers
- Standards Compliance
-
- Electrical: IBTA V2 Revision 1.2.1
- IEEE 802.3ba
- EEPROM: SFF-8436
- RoHS
RFQ Information:
| Part Number | Description | Length (Meters) | Gauge | Price | Availability | Quantity |
|---|
Contact us for larger quantity availability.
Note: Contact customer service for additional lengths and wire gauges
OEM ordering available. Contact us for more information.
Performance Specifications:
| Electrical | |
|---|---|
| Min. Dielectric Withstand Voltage | 300 VDC |
| Insulation Resistance | 1000 Mohms |
| Current Rating | 0.5 Amp Min/Signal Contact |
| General | |
| Operating Temperature | 0 to 70 C (32 to 158 F) |
| Flammability Rating (Plastics) | UL 94 |
| Green Features | RoHS, Lead-Free |
| Shield | Braid/Foil |
| Marking | Mfg Name, Part#, Date Code |
| Plug | |
| Backshell Material | Nickel Plated Zinc Diecast |
| Contact Material | PCB with Gold-Plated Pads |
| Plastic Material | Nylon |
| Latch | Positive Latching w/Pull Tab |
| Insertion Force | 40N Max. |
| Withdrawal Force | 30N Max. |
| Retention Force | 90N Min. |
| Durability | 250 Cycles |
| Tightest Recommended Vertical Spacing (Belly to Belly) | 11.80 mm Center to Center |
| Tightest Recommended Vertical Spacing (Stacked) | 17.50 mm Center to Center |
| Cable | |
| Conductor | Solid |
| Wire Gauge | 30 AWG and 28 AWG |
| Impedence | 100 +/- 5 ohms |
| Construction | Twinaxial |
| Cable OD | 30AWG = 6.1mm (0.240 in), 28AWG = 8.7mm (0.343 in) |
| Jacket Type | PVC |
| Bend Radius | 5X Cable OD -Single 10X Cable OD - Repeated |
Maximum Lengths
| Gauge | IBTA DDR (meters) | IBTA QDR1 (meters) | IEEE 802.3ba (meters) | IBTA FDR (meters) |
|---|---|---|---|---|
| 30 | 5 | 3 | 3 | 2 |
| 28 | 7 | 4 | 4 | 3 |
1 Per IBTA cable MOI VO.69:-13dB @ 5GHz
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.