CXP Passive Copper Assemblies
Siemon CXP Passive Copper Assemblies
Siemon Interconnect Solutions CXP Copper Cable assemblies were developed for high-density applications, offering a cost-effective, low-power option for high-speed data center interconnects. The CXP form factor can replace up to three standard QSFP+ connections, providing greater density and reduced system cost. These direct attached assemblies support 12 channels of 10Gb/s (QDR) for 120Gb/s Infiband, or 10 channels of 10Gb/s for 100Gb/s (IEEE 802.3ba) and are available in standard lengths up to 4 meters with longer custom lengths available.
- Applications
-
- InfiniBand 12xSDR, 12xDDR, 12xQDR
- Ethernet 10G,40G, 100G
- Rack-to-Rack, Shelf-to-Shelf Interconnect
- Networking, NIC
- Storage: DAS, SAN, NAS
- Hubs, switches, routers, servers
- Features
-
- Positive retention pull-release latch system
- Multiple conductor sizes available to achieve optimized performance
- Ultra low crosstalk for enhanced performance
- High-Density CXP Connector
- Standards Compliance
-
- SFF-8642
- IBTA V2 Revision 1.2.1 Annex A6
- IEEE 802.3ba
- RoHS
RFQ Information:
| Part Number | Description | Length (Meters) | Gauge | Price | Availability | Quantity |
|---|
Contact us for larger quantity availability.
Note: Contact customer service for additional lengths and wire gauges
OEM ordering available. Contact us for more information.
Performance Specifications:
| Electrical | |
|---|---|
| Min. Dielectric Withstand Voltage | 300 VDC |
| Insulation Resistance | 1000 Mohms |
| Current Rating | 0.5 Amp Min/Signal Contact |
| General | |
| Operating Temperature | 0 to 70 C (32 to 158 F) |
| Flammability Rating (Plastics) | UL 94 |
| Green Features | RoHS, Lead-Free |
| Shield | Braid/Foil |
| Marking | Mfg Name, Part#, Date Code |
| Plug | |
| Backshell Material | Nickel Plated Zinc Diecast |
| Contact Material | PCB with Gold-Plated Pads |
| Plastic Material | Nylon |
| Latch | Positive Latching w/Pull Tab |
| Insertion Force | 150N Max. |
| Withdrawal Force | 50N Max. |
| Durability | 250 Cycles |
| Tightest Recommended Horizontal Spacing | 27.00 mm Center to Center |
| Tightest Recommended Vertical Spacing (Stacked) | 16.50 mm Center to Center |
| Cable | |
| Conductor | Solid |
| Wire Gauge | 30 AWG and 28 AWG |
| Impedence | 100 +/- 5 ohms |
| Construction | Twinaxial |
| Cable OD | 30 AWG = 9.5mm (0.374 in.) ,28 AWG = 11mm (0.433 in.) , 26 AWG = 14mm (0.551 in.) |
| Jacket Type | PVC |
| Bend Radius | 5X Cable OD -Single, 10X Cable OD - Repeated |
* Per IBTA cable MOI VO.69: -13dB @5GHz
Maximum Lengths:
| Gauge | IBTA DDR (meters) | IBTA QDR* (meters) | IEEE802.3ba (meters) |
|---|---|---|---|
| 30 | 4 | 2 | 2 |
| 28 | 6 | 3 | 3 |
| 26 | 7 | 4 | 4 |
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.