Siemon Network Patch Panels
For more than a century family owned and operated Siemon has excelled in technological leadership. Siemon’s innovative advances focus on the manufacturing of high performance network cabling technology - with patch panels a critical component.
In this patch panel guide, we'll explore many of Siemon patch panel choices for a variety of networking applications, be it 12 port, 24 port or 48 port patch panels in flat and angled configurations.
TERA-MAX Category 7 Patch Panels
TERA-MAX patch panels provide outstanding performance and reliability in a shielded, high-density modular solution. As outlets are snapped into place, resilient ground tabs assure that each outlet is properly grounded for maximum protection from outside interference. No secondary outlet grounding operations are required, reducing overall installation time.
Z-MAX 6A Shielded Patch Panels
Z-MAX patch panels provide outstanding performance and aesthetics in a shielded, high-density modular solution. The Z-MAX panels provide rapid and reliable installation by accelerating outlet mounting, grounding, and cable tie-down operations.
In addition to traditional 24 port / 1U flat and angled versions, the Z-MAX shielded panels are also available in 48 port / 1U configurations to permit high density installations.
Z-MAX 6A UTP Patch Panels
Z-MAX patch panels provide outstanding 10 Gb/s performance and aesthetics in a high-density, modular UTP solution. The Z-MAX UTP panels provide rapid and reliable installation by accelerating module mounting, and cable tie-down operations. In addition to traditional 24 port / 1U flat and angled versions, the Z-MAX UTP panels are also available in 48 port / 1U configurations to permit high density installations.
TERA-MAX Patch Panels
TERA-MAX Category 7 Patch Panels are also suitable for the Category 6A ZMAX 6A Shielded cabling system. TERA-MAX panels are designed for use with hybrid (flat/angled) shielded Z-MAX outlets, shielded MAX or TERA outlets. Since TERA-MAX panels also accept Cat 7 TERA outlets, the panels support potential future infrastructure upgrades.
HD® 6 Patch Panels
With universal wiring for both T568A and T568B, HD 6 network patch panels were the industry’s first patch panels to exceed category 6 connecting hardware specifications for all pair combinations up to 250 MHz. Part of the System 6 cabling system, HD 6 network patch panels feature user-friendly termination, labeling, and cable management, plus they can be mounted directly to an EIA standard 19 inch relay rack or cabinet.
Rear cable manager properly guides cables to point of termination while the rear metal enclosure protects printed circuitry. To reduce installation time when lacing cables, HD 6 patch panels use a pyramid wire entry system on S310 blocks to separate paired conductors.
12-Port HD® 6 Mounted On S89D Bracket
Part of the System 6 cabling system, the HD6-89D-12, 12-port category 6 HD 6 network patch panel, with Universal T568A/B wiring, is also an economical solution for small applications. It can be used to retrofit S66™ punch down blocks to a high performance modular design.
MAX® Patch Panels
MAX patch panels provide a flexible, high density termination solution for the telecommunications room. Using the full line of MAX modules (available separately), the panel can be configured for a variety of multimedia applications and 10GBASE-T performance. A rear cable management bar isincluded for routing horizontal cables to terminations.
Angled MAX Patch Panel
Siemon's MAX series angled patch panels route cables directly into the vertical cable managers eliminating the need for horizontal cable management between panels. The Angled MAX Patch Panel combines modular design with high density and is capable of supporting multiple media types using a variety of MAX modules. Available in 1 and 2 RMS versions.
12-Port HD5® Mounted On S89D Bracket
Are you looking to retrofit 66 punch down blocks to a modular design? Mounted on S89D bracket, Siemon category 5e HD5-89 network patch panels are also economical solutions for small applications. The D-12 48-port panel, 2 RMS is a 12-port HD5 patch panel featuringUniversal T568A/B wiring.
HD5® Patch Panels
Part of the Premium 5e cabling system, this is the industry’s most robust modular patching solution. HD5 network patch panel component and channel performance are patented to 160 MHz exceeding category 5e requirements. HD 5 patch panels feature universal T568A/B wiring and compliant pin technology enabling the use of multi-pair S110 punch-down tools to reduce termination time. These network patch panels also include rear cable manager, designation labels, icon/label holders, cable ties and mounting hardware for efficient cable management. See Optional HD® Panel Accessories for related patch panel products.
- HD5-16 - 16-port panel, 1 RMS
- HD5-24 - 24-port panel, 1 RMS
- HD5-32 - 32-port panel, 2 RMS
- HD5-48 - 48-port panel, 2 RMS
- HD5-96 - 96-port panel, 4 RMS
HD5® Quick-Patch™ Panel
For quick and easy category 5 channel patching solutions for 10/100BASE-T hubs with 25-pair connectors try Siemon’s HD5 Quick-Patch network patch panels. HD5-QP-48 48-port patch panels are user friendly and include designation labels, icon/label holders, and mounting hardware. For related products see Category 5e and 3 25-Pair Cable Assemblies.
Fiber Connect Panel (FCP3)
Siemon Fiber Connect Panels (FCP3-DWR and FCP3-RACK) economically connect, protect, and manage up to 72 fibers within one Rack Mount Space. It accepts Siemon's Plug and Play modules, MTP Adapter Plates and Quick-Pack™ adapter plates.
Rack Mount Interconnect Center (RIC3)
Supporting Siemon's Plug and Play modules, MTP Adapter Plates and Quick-Pack™ adapter plates, the RIC3 enclosure offers superior fiber density (up to 288 fibers in just 4 RMS) without sacrificing fiber protection and accessibility. Features include a fully removable tray, improved labeling, standard front and rear door locks, and single-finger door latches. With superior cable management, port identification, fiber accessibility and security, the RIC3 Rack Mount Interconnect Center is the best way to protect mission critical fiber connections.
Wall Mount Interconnect Center (SWIC3)
The Wall Mount Interconnect Center (SWIC3) is a cost-effective fiber enclosure designed to manage and protect up to 96 fiber connections. The low-profile, compact design makes it ideal for telecommunications closets or other installation areas where wall space is a premium. The adapter mounting method is standardized on the same snap-in Quick-Pack™ adapter plates used in our family of Rack Mount Interconnect Centers (RIC3).