ACMA A-Tick Exempt Part Numbers
The below listed products comply with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act.
Evidence of compliance is demonstrated by test reports to the applicable standards as listed in the individual specification sheets for each product listing.
|Part Number||Description||Product Family|
|D10||White lined designation strip for M Series S66 blocks||Designation Strips|
|D13||White lined designation strip for B Series S66 blocks||Designation Strips|
|DA8-S(XX)M-02||Category 8 Compatible RJ-45 to RJ-45 modular plug, CM/LS0H cable assembly, T568A/B wiring, white jacket, clear boot||TERA Category 8.2 Patch Cords|
|DIN-PNL-04-01||4-Port MAX DIN Rail Patch Panel, Black with individual port openings. Includes (4) cable ties||DIN Rail Mounted Patch Panels|
|DIN-PNL-04W-01||4-Port MAX DIN Rail Patch Panel. Black with single opening. Includes (4) cable ties. H: 53mm (2.1 in.), W: 103mm (4.0 in.), D: 82mm (3.2 in.)||DIN Rail Mounted Patch Panels|
|DIN-PNL-RIC-01||RIC adapter DIN Rail Patch Panel, Black with a single RIC adapter plate opening. Includes (4) cable ties and (2) fiber management clips. H: 58mm (2.3 in.), W: 154mm (6.1 in.), D: 108mm (4.3 in.)||DIN Rail Mounted Patch Panels|
|DP-S-(XX)||Single gang, plastic Duplex faceplate||MAX Duplex and Designer Faceplates|
|DR-D-(XX)||Double gang Designer faceplate||MAX Duplex and Designer Faceplates|
|DR-S-(XX)||Single gang, plastic Designer faceplate||MAX Duplex and Designer Faceplates|
|DRE-D-(XX)||Double gang Designer/Duplex faceplate||MAX Duplex and Designer Faceplates|