Google Translate

Worldwide | United States/Canada

ACMA A-Tick Exempt Part Numbers

The below listed products comply with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act.

Evidence of compliance is demonstrated by test reports to the applicable standards as listed in the individual specification sheets for each product listing.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I |
J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

1

Part NumberDescriptionProduct Family
10GBPS-(XX)M-(XX)L6A Shielded BladePatch patch cord with push-pull latching design, stranded CM/LS0H cord, color matching cord/boot, T568A/BCategory 6A Shielded BladePatch
10GMX-BFP-02-(XX)2-Port single gang 10G faceplate for Z-MAX, MAX or TERA outlets10G MAX British Faceplates
10GMX-BFP-04-(XX)4-Port single gang 10G faceplate for Z-MAX, MAX or TERA outlets10G MAX British Faceplates
10GMX-BFPL-02-(XX)MAX British Double Layer Faceplate, 2-Port single gang 10G faceplate for Z-MAX, MAX or TERA outlets. Designed for markets that use British mounting standards (85mm x 85mm), this faceplate offers improved aesthetics via snap-on mounting screw covers. Faceplate includes designation labels, clear label covers, and M3.5 x 0.6x25 mounting screws. Add "M" to end of part number for M4 x 0.7x25 mounting screws.10G MAX British Faceplates
10GMX-FPD06-026-port double gang 10G faceplate for Z-MAX 6A UTP Outlets10G MAX Faceplates
10GMX-FPD08-028-port double gang 10G faceplate for Z-MAX 6A UTP Outlets10G MAX Faceplates
10GMX-FPS02-(XX)2-port single gang 10G faceplate for Z-MAX 6A UTP Outlets10G MAX Faceplates
10GMX-FPS04-(XX)4-port single gang 10G faceplate for Z-MAX 6A UTP Outlets10G MAX Faceplates
10GMX-HFP-02-(XX)Single gang 10G Australian/Italian faceplate for two Z-MAX 6A UTP Outlets10G MAX Australian/Italian Faceplates
10GMX-HFP-03-(XX)Single gang 10G Australian/Italian faceplate for three Z-MAX 6A UTP Outlets10G MAX Australian/Italian Faceplates
10GMX-HFP-04-(XX)Single gang 10G Australian/Italian faceplate for four Z-MAX 6A UTP Outlets10G MAX Australian/Italian Faceplates
10GMX-HFPZ(XX)-0210G MAX Horizontal Faceplate,AS/NZ,2White. 10G MAX faceplates provide optimal outlet separation to ensure alien crosstalk (ANEXT) compliance for Z-MAX 6A UTP installations.Australian/New Zealand Horizontal Faceplates
157APair Capacity: 25 One male 25-pair connectorPre-Wired 157 Series
157BPair Capacity: 50 (unbridged) Two male 25-pair connectorsPre-Wired 157 Series
157CPair Capacity: 50 (unbridged) Two female 25-pair connectorsPre-Wired 157 Series
1923-(X)19 to 23 inch panel adapter (set of 2)19 To 23 Inch Panel Adapters