RS3 Cable Management Rack System
- Product Resources
Part Numbers
Specification Sheet Library
Installation Instructions
- Related Products
- RS3 Series Horizontal Cable Managers
- Rack Accessories
Overview
Siemon's RS3 series cable management rack system provides high capacity cable management for routing of both horizontal/backbone cabling and patch cords. Vertical channels with hinged cable manager covers conceal and route patch cables for a clean, professional installation.
- Header bars incorporate unique slotted holes for securing cable trays routed perpendicularly or parallel to RS3 racks
- 76mm x 152mm (3 in. x 6 in.) front vertical managers provide capacity for approximately 190 category 6 patch cords
- RS3 design allows racks to be side-stacked without interference between adjacent racks
- 116.8mm x 152.4mm (4.6 in. x 6 in.) vertical side rails provide higher cable capacity over standard rack designs
- Side rails compatible with Siemon's quarter-turn hook and loop cable managers for proper management of cable bundles
- Access holes on side rails allow cables to be routed between adjacent racks
- Mounting holes on rear of RS3 accommodate Siemon's vertical power strip (p/n RS-P04) to provide power to active equipment mounted in rack
- Mounting holes provided for anchoring racks to floor
Benefits
- Front covers fully conceal all vertical patch cord routing through an easy to use, modular design. Each section can be individually hinged in either direction to facilitate quick and easy changes. Covers include positive securing snap latches for trouble-free fastening
- The individual managers on the vertical channels are rounded to allow patch cords to seamlessly enter and exit the managers without risk of cable deformation
- Siemon's series horizontal cable managers provide a fully integrated appearance and hinging design for comprehensive management of patch cords
Part Numbers
- RS3-07 (Picture) 2.1m x 0.48m (7 ft. x 19 in.) aluminum enhanced cable management rack system, 45U. Includes rack assembly hardware, vertical cable management channels with hinged covers, and ground lug. height: 2.1m (7 ft.), width: 685.0mm (27 in.), depth: 457.2mm (18 in.)
Add "-S" for steel.
- Note:
- Aluminum racks are intended for use with connecting hardware and cable managers only. For mounting of active equipment, steel racks are recommended.
- 1U = 44.5mm (1.75 in.)
- See Cable Management Capacity Table
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice
Partner Support Center
Share This
Tweet