Google Translate

Worldwide | United States/Canada

Heat Shrink Sleeves

Heat Shrink Sleeves Enlarge this image


Heat shrink sleeves provide a safe and efficient method for protecting fusion splices on either 250 or 900 micron coated fibers. Heat shrink sleeves are threaded on to fibers prior to fusion splicing and then positioned directly over splice and heated via an oven or heat gun*.

Technical Tip!
For cleave lengths greater than 12mm (0.47 in.), HT-60 sleeves are recommended.

Part Numbers

HT-40 (Picture) 40mm (1.57 in.) heat shrink sleeve
HT-60 (Picture) 60mm (2.36 in.) heat shrink sleeve
*Heating times may vary depending on heat source.

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice